產品名稱：
差分探頭| P5200A
更新時間：2024-09-07
產品型號：P5200A
產品報價：
產品特點：差分探頭| P5200A 差分探頭主要用于觀測差分信號：差分信號是相互參考、而不是以地作為參考點的信號。普通的單端探頭也可以測量差分信號，但得到的信號與實際信號相差很大，有可能出現(xiàn)“地彈"現(xiàn)象。
P5200A差分探頭| P5200A的詳細資料：
差分探頭| P5200A
差分探頭| P5200A
Features & Benefits
- Bandwidths up to 200 MHz
- Up to 6000 V Differential （DC + pk AC）
- Up to 2300 V Common （RMS）
- Overrange Indicator
- Safety Certified
- Switchable Attenuation
- Switchable Bandwidth Limit
Applications
- Floating Measurements
- Switching Power Supply Design
- Motor Drive Design
- Electronic Ballast Design
- CRT Display Design
- Power Converter Design and Service
- Power Device Evaluation
Safe High-voltage Probe Solutions
Tektronix offers a broad portfolio of high-voltage probing solutions that enable users to safely and accuray make floating measurements.
The THDP0100 and P5210A have the largest differential dynamic range capability from Tektronix, allowing users to safely measure up to ±6000 V. The THDP0100 supports bandwidths up to 100 MHz and slew rates up to 2500 V/ns at 1/1000 gain. These probes are supplied with two sizes of hook tips and have an overrange visual and audible indicator which warns the user when they are exceeding the linear range of the probe.
The THDP0200 and P5205A are active differential probes that are capable of safely measuring differential voltages up to ±1500 V. The probes are effective in making measurements in IGBT circuits such as motor drives and power converters. The THDP0200 supports bandwidths up to 200 MHz and slew rates up to 275 V/ns at 1/250 gain.
The TMDP0200 and P5202A are designed for medium-voltage applications with differential requirements up to ±750 V. These probes have lower attenuation ranges and offer better signal-to-noise ratio.
The P5200A can be used with any oscilloscope and enables users to safely make measurements of floating circuits with their oscilloscope grounded. The P5200A Active Differential Probe converts floating signals to low-voltage ground-referenced signals that can be displayed safely and easily on any ground-referenced oscilloscope.
WARNING: For safe operation, do not use the P5200A High-voltage Differential Probe with oscilloscopes that have floating inputs （isolated inputs）, such as the Tektronix TPS2000 and THS3000 Series oscilloscopes. The P5200A High-voltage Differential Probe requires an oscilloscope or other measurement instrument with grounded inputs.
| 如果你對P5200A差分探頭| P5200A感興趣，想了解更詳細的產品信息，填寫下表直接與廠家聯(lián)系： |
在線客服